Documentation/Pricing setup
Bending and tubes
Press-brake bending, tube laser cutting and tube bending: machines, files, what a customer states and what waits for a technologist.
A shop quotes bending and tube parts when it has a machine of the matching technology:
- “Press brake”: bends a flat part cut on a sheet-cutting machine. Without one, it bends blanks the customer delivers or the shop buys cut (described here).
- “Tube laser”: cuts straight tube and open sections. A tube it can take is cut on it, unless machining is selected.
- “Tube bender”: bends round tube after the cut. It prices an operation and no part by itself. A tube laser makes the cut. In a shop without one, a tube with only square ends is priced as a length bought cut to size, and a tube with other cuts needs a tube laser (tube_cuts_need_laser). Without a tube bender, a bent tube always waits for a technologist.
Without the matching machine, neither bending nor tube work is priced:
- A bent part or a tube gets a machining figure where a mill or a lathe takes it, and the quote waits for a technologist (formed_sheet_part, tube_part). Where neither takes it, the quote has no price.
- A DXF flat pattern with bend lines is priced flat, without bending, and waits for a technologist (dxf_bend_lines).
- The customer is asked nothing about bend lines.
A press brake with no sheet-cutting machine
When the park has a press brake and no sheet-cutting machine, the press bends blanks that arrive already cut. “Materials”, block “Blanks for the press brake”, then has two boxes:
- “Customer's blanks”, ticked by default: the customer cuts the blanks and delivers them with the order. The price covers the bending, with no metal.
- “Blanks bought cut”: the shop buys the blanks from a supplier. The price covers the blank, from the supplier list, and the bending.
With neither ticked, a bent part is refused (bending_needs_sheet_cutter). With both ticked, the customer chooses in the widget: “I supply the cut parts” or “Cutting included”. Until then the server answers 422 blank_source_required. The panel and the API take the customer's blanks, and “Blank” on the quote screen changes the variant and prices the quote again. The API takes a blank_source field on create and reprice; a variant the shop does not offer is 422 blank_source_not_offered.
In both variants:
- Bending is priced as after a cut: the same press brake settings, bend lines and review reasons.
- The customer chooses a material: it decides the force, the radius, the mass and the delivery. The materials offered are those of sheet cutting, plastics excluded.
- Not charged: cutting, gas, the cutting program, sheet changes, tapping and countersinking, and the ISO 9013 statement. The list of stocked sheet thicknesses does not apply.
- A flat part with no bend lines, or with every line removed, is refused (bending_needs_sheet_cutter). In a park with a mill it is milled.
- A set (several parts in one DXF, an assembly) has one variant for the whole quote.
Customer's blanks
- The blank is the flat's rectangle. The quote screen shows it as “Customer's blank” with its size and thickness. The widget adds “You deliver the cut parts with your order.”, the PDF offer says “Bending of customer-supplied {t} mm blanks”, and the order mails to the customer and to the shop carry it as a detail row.
- A DXF or PDF flat is the blank as drawn. A blank developed from a bent model holds the quote (bend_blank_supplied_developed): the customer cuts it from their own flat, with their own K-factor and radius.
Blanks bought cut
The supplier list is entered in the material editor, section “Blanks bought cut”:
- “Metal in a blank”: the price of a kg of metal. Empty: the sheet price, and without one the price per kg.
- “Supplier list”: one row per thickness, with a price per metre of cut and per pierce. A part's thickness matches a row within 0.05 mm or 2%. Nothing is interpolated between rows.
A blank's price is the metal of the flat's rectangle grown by the gap between parts, plus the cut length times the price per metre and the pierces times the price per pierce. The group “Bending” also holds “Blank order fee”, once per order line, and “Blank delivery”, working days added to the lead time. No amount has a default.
- With no row for the part's thickness and no typed price, the quote has no price (bought_blank_unpriced). The widget then does not offer a bought blank, and with both variants ticked it asks no question.
- “Supplier's blank price” on the quote screen replaces the list's figure on that quote. The order fee stays. On a set, the price is entered per part; a price for the whole quote is 422 blank_unit_cost_per_part.
- A bought blank also gets the review reasons of a cut part: holes and webs too small for the thickness.
- The customer is not told where the blank comes from. The PDF offer says “Sheet bending, {t} mm”.
Files
- Bent STEP or IGES, one solid of constant thickness: the engine unfolds the model and measures each bend. The flat is priced as a part cut from sheet.
- Bent model with no radii, up to 6 mm thick: unfolded at radius 0. The quote always waits for a technologist (bend_radius_zero).
- DXF flat pattern: the file's outline is the flat. Bends come from lines and notes.
- Vector PDF flat pattern: the outline and the lines with evidence are read. The quote always waits for a technologist (pdf_reconstruction).
- Flat STEP or IGES, a file with one part or a part of an assembly: the model has no bend lines. They are drawn on the preview.
- Tube in STEP or IGES: read as described below.
Not read: DWG and scanned flat patterns. A bent model is not unfolded when a bend meets a plane along a curve, two bends meet at an angle, a bend's surface cannot be read, or the sheet closes on itself. Such a part stays on hold (formed_sheet_part).
Bend lines in a DXF
A line that crosses a part is a bend line when one of these applies:
- It lies on a bend layer. The whole layer name counts, in any case: BEND, BENDLINES, BEND_UP, BEND_DOWN, IV_BEND, IV_BEND_DOWN, FOLD, BIEGELINIE, BIEGEKANTE, BIEGUNG, ABKANTUNG, GIECIE, gięcie, LINIA GIĘCIA, Up Centerline, Down Centerline, and the Chinese term for a bend line.
- It is drawn in a broken line type, on any layer.
Further rules:
- The line is straight and reaches an edge or a cut at both ends, within 1 mm or 1% of its length. A hole's centre cross is not a bend.
- Pieces on one straight within 0.5 mm are one bend.
- A closed contour on a bend layer is cut, not bent.
- A line on a frozen layer is ignored.
- A solid line across a part on any other layer is refused (dxf_common_line): it may be a shared cut or a bend.
- With more than 500 such lines, the part is priced flat and the note stays (dxf_bend_lines).
The direction comes from the layer name (IV_BEND or a name with up: up; a name with down: down) or from a note. A note counts within 25 mm of the line, and only when it speaks of a bend:
- direction and angle: UP 90.00 R1.00, DN 135° R1.5;
- keywords: BEND_ANGLE: 90, BEND_RADIUS: 2, BEND_DIRECTION: UP;
- direction words: up, dn, down, góra, dół, oben, hoch, unten, runter, and the Chinese words for up and down;
- not a note: SETUP 90, DN 50, UP 20 mm, 50°C, an angle over 180°, text on a frozen or title layer.
Bend lines in a PDF
In a vector PDF, a line is a bend line only with evidence:
- any pen, on a layer named as in a DXF;
- a dashed line with a note of its own: a direction word or a keyword. A note with an angle alone gives a line its angle and does not make it a bend;
- a plain dash, never a dash-dot, on a sheet that calls itself a flat pattern: FLAT PATTERN, BLANK DEVELOPMENT, ABWICKLUNG, ROZWINIĘCIE or the Chinese term.
Where the file names its part's layers, only the layers count. The outline is the largest closed loop the lines cross from edge to edge, and its overall size must be printed on the sheet. A missing scale or thickness is asked for. With no line attributed, the sheet is read as any other drawing.
Tube files
- Round, square and rectangular tube: a wall of at most 0.1 of the diameter (round) or 0.2 of the width (hollow section), and a length of at least 2 widths. A plain round length with nothing cut in it, shorter than 4 diameters, reads as a sleeve and stays on the lathe.
- Open sections: angle, channel (lipped included), tee, I or H beam, and zed. A length of at least 2 × the widest side, and walls of at most 0.2 of the smaller side.
- Bent round tube: the centre line is read into the bends table.
- Bent rectangular tube: read. With a tube bender in the park it is priced and held for review (tube_rect_bend_check); the conditions.
- Cuts are read from the surfaces and checked against sections through the solid. A tube whose cuts cannot be checked is refused by the tube laser (tube_cuts_unread).
What a customer states
In a shop with a press brake, the configurator lists a flat pattern's lines in the “Bends” section. A bend read from a solid is listed as measured, with “Radius [mm]” as a third field; a change to it holds the quote for the shop (bend_solid_corrected). Fields of a line:
- “Direction”: “Up” or “Down”, seen from the top side, which an arrow on the preview marks. “I don't know” leaves it to the shop.
- “Angle [°]”: how far the sheet is bent, above 0° and up to 180°. 90 is a right angle.
- “Not a bend” takes the line away. “Bring back” returns it.
- “All bends”: “90° up” or “90° down” answers every line of the part on screen in one click.
- A file that states every line needs no answer: the step counts as done and reads “N bends from the file”.
- With a line left without a direction or an angle, a notice above “Calculate quote” says how many, and “Fill in” opens the section. The quote can still be calculated. It is then held, and the price screen names the lines and offers “Fill in and price now”.
A customer states no radius.
On the 3D preview
- A click on a line opens a label with its number and angle, and “Turn the direction”, “Bend angle” and “Not a bend”. A line nobody stated shows “↕” and “–°”. A change goes into the list, and a row and its line light each other. Enter opens a label from the keyboard, and Esc takes back an angle being typed.
- “Folded” shows the part with the stated angles and directions, and switches on by itself once every line has both. A line with no angle is drawn at 90°, up, and a note names such lines. The view is a preview, and no price reads it. It is not offered when the lines do not part the flat.
Drawing a line
- “Draw a bend” is offered on a flat DXF part and on a flat STEP or IGES part: a file with one part, or a part of an assembly opened by itself. The part may lie at any angle in the file.
- Click an edge, then the opposite edge. The bar under the model says which end is next and has “Cancel”; Esc cancels too. An end is taken within about 15 px of an edge, and a click elsewhere does nothing. Within 10° of an axis or of square to the first edge, the line is made exactly that. A line cannot end on the edge it starts on.
- The file is read again with the line, and the quote is priced again. The row is marked “drawn”; the panel says who drew it.
- Limit: 12 drawn lines per quote from the widget, 40 from the panel (422 too_many_bend_lines).
- “Delete the line”, on the row or on the line's label, takes a drawn line away, and the file is read again. A customer deletes only their own lines. What was stated about the lines after it moves with them.
- A drawn line that does not run from edge to edge is no bend. The widget says so and offers to delete it, and the quote is held (dxf_bend_lines_unread).
What holds the quote
- a line with no direction (bend_direction_unknown);
- a line with no angle; the price takes 90° (bend_angle_assumed);
- an angle other than 90° from a note, which may mean the bend or the angle left between the flanges (bend_angle_check);
- a line the customer drew (bend_line_drawn);
- a line the customer took away (bend_line_removed).
A direction and an angle stated by the customer settle the first three. The other reasons still hold the quote.
How a tube is made
“How it is made” appears when the part can be made in more than one way. Nothing is selected by default. Until a choice is made, the server answers 422 process_required. Options:
- “Tube laser cutting”: a closed section;
- “Cut from a rolled section”: an angle, a channel, a tee, a beam or a zed;
- “Tube cutting and bending”: a bent round tube, which has no machining option;
- “CNC machining”: when a mill or a lathe can take the part;
- the sheet-cutting option: an angle or a channel that may equally be a bent sheet.
A tee and a beam are always rolled. An angle, a channel or a zed with the marks of a rolled section (root radius, tapered flange, a flange thicker than the web) is cut on the tube laser. Any other can be a rolled section or a bent sheet:
- With a tube laser, a press brake and a sheet-cutting machine, the customer chooses. In the panel and the API, the engine keeps the sheet price and the quote waits until a process is stated (tube_or_bent_sheet).
- With a tube laser and no press brake, it is cut on the tube laser and waits for a technologist (tube_or_bent_sheet).
The widget's summary and the PDF quote show “Cut tolerance”, “Bend tolerance” and “Cutting notes”. A combined quote and a part of a set do not show them.
On the quote screen
The “Bends” card, above “Customer specification”, lists a flat pattern's lines for the part on screen, in a shop with a press brake. It stays in place while the parameters are edited. On a set with no part selected it lists the parts that have lines, and a click opens the part. Columns and controls:
- “Length [mm]”: read from the file.
- “Direction”: “Up”, “Down” or “Not stated”.
- “Angle [°]”: above 0° and up to 180°. From 170° the line is a hem (bend_hem).
- “Radius [mm]”: 0 to 500 mm.
- “customer: ↑ 90°”: what the customer stated, struck through once the table says otherwise. “drawn by the customer” and “drawn here”: who drew the line.
- “Not a bend” and “Restore”: take a line away and return it. A drawn line has “Delete the line” instead.
- “Save and reprice”: active after a change. It states every row and prices the quote again. “Cancel” drops the change. “Restore the file's reading” takes back what was saved, so the file's and the customer's word stand again.
- Leaving the quote or opening another part with a change not saved asks first.
- “Show”, beside a reason about the lines (bend_direction_unknown, bend_angle_assumed, bend_line_drawn), opens the table at the first such line.
Anything stated or drawn here holds the quote (bend_inputs_stated), so it does not reach the customer by itself.
The same on the model: a click on a line opens its label with “Turn the direction”, “Bend angle” and “Not a bend”. “Draw a bend” and “Folded” work as in the widget. A change on the model goes into the table and is saved with it. A bend read from a solid is in the table too: a new angle or radius develops the flat again with the same K-factor, and the price, the sheet nest and the DXF follow it. A change made here holds nothing; a change by the customer holds the quote until saved here. Where no flat can be developed, the quote waits (bend_blank_not_redeveloped).
The bends table of a tube
“Bends” lists a bent tube's line as length, rotation and angle (LRA), read from the file's centre line in the order a bender makes the bends. It cannot be edited. A row and its bend on the model light each other.
- “Straight before [mm]”, “Rotation [°]” (the turn of a bend's plane against the last one's), “Angle [°]”, “Radius [mm]”.
- On a tube a bender priced: “Mandrel”, “Wiper” and “Outside wall [mm]” with the thinning in percent. Mandrel and wiper come from the Tools for Bending chart, by wall factor and radius. P: a plug or empty bending. RP, CP, UCP: regular, close and ultra-close pitch; the digit is the number of balls.
- Under the table: “Straight after the last bend” and “Not on the machine's list”.
A bent rectangular tube shows the same reading with no tooling. “Cut plan” draws one bar as the price assumes it: the parts, the gaps and the tail.
The flat pattern as a DXF
The quote screen of a bent STEP or IGES model has a “Flat pattern” row under the preview, with the size of the flat's rectangle and a “Download DXF” button. On a set the file is that of the part open in the preview. The shop downloads the file in the panel or through the integration API. The customer does not get it.
- Unit: millimetre. Layers: IV_OUTER_PROFILE (outline), IV_INTERIOR_PROFILES (holes and cut-outs), IV_BEND (bend up), IV_BEND_DOWN (bend down), MQ_NOTES (notes).
- Round holes are circles and rounded corners are arcs of a polyline. The outline lies within 0.05 mm of the flat developed at analysis.
- Each bend line has a note “UP 90° R2” or “DOWN 90° R2”: direction, angle and inner radius. A line parted by a cut-out is drawn in its pieces.
- The flat is drawn from the side the “UP” bends fold towards.
- Under the outline the file states the quote number, the thickness and the K-factor: the value of the “K-factor” field, or the DIN 6935 values for each radius. Radii are as modelled. A model with no radii is developed at radius 0.
- It is the flat the price was calculated on. It does not account for the radius the shop's die leaves. Check it against your own bend table before cutting.
- A DXF or PDF flat pattern uploaded to a quote has no such row: the file is the flat.
- 409 flat_not_available: the quote's preview holds no flat pattern. Upload the file again as a new quote. 409 quote_files_expired: the quote's files have been deleted.
Process and route
- “Process” on the “Customer specification” card: “Sheet cutting”, “Tube cutting”, “Tube cutting and bending”, “Cutting from a section” or “Machining”. The selection prices the quote again.
- On a quote held as formed_sheet_part or tube_part: “Bent or tube part” leaves out bending and tube work, and the technologist enters the price. “Not bent, not a tube” keeps the figure, keeps a press brake out of the part, and the quote waits for approval (formed_part_machined).
Machines and settings
Add these machines in the “Quoting rules” tab, as any other. “Find in the catalogue” has the filters “Press brakes”, “Tube lasers” and “Tube benders”; a pick copies the maker's figures, and the hourly rate and the minimum batch stay the shop's. In “Settings for”, the press brake's settings are under “Sheet metal”, subsection “Bending”, and those of the tube laser and the tube bender under “Tubes and profiles”, subsections “Tube cutting” and “Tube bending”.
Press brake
- “Bending length × width between columns × open height [mm]”: a bend longer than the first figure is refused. One longer than the second waits for a technologist.
- “Press force [kN]”: a part needing more is refused. Empty: not checked.
- “V dies [mm]”: the die openings the shop owns, such as 12, 16, 24. The die, radius, force and tool stations then follow this list. Empty: the usual die for the thickness.
- “Max workpiece [kg]”: a heavier part is refused.
- “Setup effort (× baseline)” in “How this machine runs”: scales the setup on this machine.
“Operation times”, group “Bending”:
- “Setup per order line [min]”, “Bending program [min]”, once per order line.
- “Each further tool station [min]”: one station per inner radius, one for hemming.
- “Two operators from [kg]” and “Two operators from [mm]”: from this mass or this blank length, a part takes two people.
- “K-factor”: the shop's neutral axis position, 0.2 to 0.5, for the flat of a bent solid. Empty: DIN 6935. It reaches files analysed from then on, not stored readings.
“Safety gates”: “Bent part: shortest flange [× table]” multiplies the table of shortest flanges. 1.0 takes the table as it is.
Tube laser
- “Longest tube × largest section × thickest wall [mm]”: a tube over the first two figures or a wall over the third is refused. Zero: not stated.
- “Source power [kW]”: selects the default speed table.
- “Rotary chuck [rpm]”: limits rotation and, on small round tube, cutting speed. Empty: by the machine's largest section.
- “Unusable bar end [mm]”: what the chucks leave, charged to the bar's parts. Empty: 200 mm.
- “Largest mass per metre [kg/m]”: a heavier tube is refused. Empty: not checked.
- “Largest square side [mm]”: when it differs from the round figure. Empty: the round figure.
- “Axial move [m/min]” (empty: 60) and “Axial acceleration [m/s²]” (empty: by the machine's largest section).
- “Longest finished part [mm]”: a longer part is refused. Empty: not checked.
- “Widest open section [mm]”: a wider one is refused; 0 takes none. Empty: every open section waits for a technologist.
- “Bevel head”: “Not stated: a person checks each mitre”, “Yes” or “No: a mitre is refused”. A mitre is a cut leaning more than 5° off square to the wall.
- “Bevel head limit [°]”, with “Yes”: a steeper mitre is refused. Empty: over 50° waits for a technologist.
- “Cut quality (ISO 9013)”: what the quote states about the cut. It does not change the price.
“Operation times”, group “Tube cutting”: “Setup per order line [min]”, “Cutting program [min]”, “First part check [min]”, “Speed against sheet”, “Highest cutting speed [m/min]”, “Loading a bar [s]”, “Unloading a part [s]”, “Bar length [mm]”, “Gap between parts [mm]”.
“Pricing & margin”: “Tube charged per part”, either “Length + gap + share of the tail” or “Whole bars”.
Material editor, section “Cutting”:
- “Tube price”: the price per kg when the material is cut from tube. Empty: the price per kg.
- “Stocked sections”: “Shape” (“Any shape”, “Round”, “Square or rect.”, “Angle”, “Channel”, “Tee”, “I or H beam”, “Zed”), “Width”, “Height”, “Wall”, “Price” (“per kg” or “per m”), “Bars [mm]”. Another section waits for a technologist. Empty: any section.
Tube bender
- “Longest tube × largest diameter × largest bend radius [mm]”: over any of them is refused. Zero: not stated.
- “Wall at the largest diameter [mm]”: the maker's rating, carried to the part's diameter and material. A thicker wall is refused. Empty: not checked.
- “Strength it is rated at [N/mm²]”: empty: 400.
- “Die stacks on the head”: a part with more bend radii waits for a technologist. Empty: not checked.
- “Die sets”: “Diameter [mm]”, “Bend radius [mm]”, “Mandrels: RP2, CP4” (chart codes; empty: not stated; a dash: none held) and “Wiper: not stated”, “Wiper: held” or “Wiper: not held”. Empty list: not checked. Once listed, a part needing another set waits for a technologist.
“Operation times”, group “Tube bending”:
- “Die change”, “Further radius”, “Program and first part”, “Load and unload [s]”, “Clamp and return per bend [s]”, “Feed [mm/s]”, “Rotation [°/s]”.
- “New die set”, “New mandrel”, “New wiper”: charged once per order line for what the machine's list does not hold.
- “Mandrel wear per bend”: added per piece for every bend the mandrel chart gives a ball mandrel (0 by default).
- “Supplier cut to length, per piece”: a plain length for bending bought cut to size. Empty: the bar's cut fee by diameter.
- “Plain tube lengths” (a shop with a tube laser): who cuts a round tube with two square ends and nothing else, straight or for bending. “Own tube laser” (default), “Bought cut to length” or “Cheaper of the two”, which prices both and takes the lower unit price. A technologist may choose otherwise for one quote (“Length cut by” on the quote screen). A length with holes or notches is always cut on the laser.
“Safety gates”: “Bent tube: largest thinning”: a bend whose outside thins more waits for a technologist. Empty: off.
Calibration lists
Each of these machines has its own list in the Calibration tab, under “What to calibrate”. The minimum of 5 entries and the ranges are the same as on the other lists.
- “Press brake”: shown with a press brake beside a sheet-cutting machine, or with a blank variant ticked. STEP, IGES or a DXF flat pattern read with its lines. It fits “Bending multiplier” and “Setup per order line [min]”. The cut stays at what the sheet-cutting list says. Without a sheet-cutting machine a part has a “Blank” field when both variants are ticked, and a bought blank a “Supplier's blank price” field.
- “Tube laser”: STEP or IGES. It fits “Tube cutting multiplier” and “Setup per order line [min]”.
- “Tube bender”: STEP or IGES. It fits “Tube bending multiplier” and “Die change”. The cut stays at what its own list says.
A part on the wrong list is skipped with a reason:
- bent_sheet_sample: Cut and bent: it is fitted by the press brake calibration, not this one.
- bent_blank_sample: Bent from the customer's blank: it is fitted by the press brake calibration, not this one.
- not_a_bent_sample: a part not read as bent, also a DXF with no lines, is fitted by the sheet-cutting calibration.
- tube_laser_sample: Cut from tube: it is fitted by the tube laser calibration.
- not_a_tube_sample: Not cut from tube: it is fitted by another calibration.
- bent_tube_sample: A bent tube: it is fitted by the tube bender calibration.
- not_a_bent_tube_sample: Not a bent tube: it is fitted by another calibration.
A price approved on a quote held as formed_sheet_part, tube_part or tube_bend_not_analytic does not enter the machining list.
Reasons a quote is held or refused
Each code is followed by the words on the quote screen. The customer does not see these reasons.
No matching machine
- formed_sheet_part: Bent sheet part: the price is for milling it from solid, which is probably not how it is made. Bending is not quoted automatically - enter the price yourself, or confirm the part is machined.
- tube_part: Tube or hollow section: the price is for machining it from solid or bar, which is probably not how it is made. No tube machine in the price list takes it - enter the price yourself, or confirm the part is machined.
- formed_part_machined: Recognized as bent sheet or a tube, and you said it is not. The price stands; check the machine, material and blank before approving.
- bent_sheet_part: Bent sheet part: the file shows the formed part. Sheet cutting prices a flat blank only - unfolding and bending are not quoted automatically.
- tube_bent: A bent tube, and no tube bender in your price list takes it.
- no_tube_machine: Tube cutting was chosen, and no machine in your price list cuts tube.
- dxf_bend_lines: Bend lines cross a part: the part is quoted flat, without bending.
- bending_needs_sheet_cutter: The price list has no sheet-cutting machine, and the press brake has nothing to bend here: the part has no bend lines, or the price list takes no customer's blanks.
Press brake
No press brake takes the part, and the quote has no price:
- bend_exceeds_bed: The bend is longer than this press brake's bending length.
- bend_exceeds_force: Bending this part takes more force than this press brake has.
- bend_part_too_heavy: The part is heavier than this press brake takes.
A bought blank has no price:
- bought_blank_unpriced: Your supplier list for this material has no blanks of this thickness. Enter the supplier's price for the blank, or add the thickness to the list.
The DXF is not priced:
- dxf_common_line: A solid line runs across a part from edge to edge: a shared cut between two parts, or a bend line. Bend lines go on a layer named BEND or in a dashed line type. Price it by hand or ask for a corrected file.
The quote has a price and waits for a technologist:
- bend_inputs_stated: Some bend details were typed in by hand. Check them before approving.
- bend_line_drawn: The customer drew a bend line that is not in the file. Check it.
- bend_line_removed: The customer took away a bend line the file has. Check it.
- bend_angle_assumed: Some bend lines state no angle. The price takes 90 degrees: check the angles.
- bend_angle_check: A note states an angle other than 90 degrees. Check whether it means the bend or the angle left between the flanges.
- bend_direction_unknown: Nothing says which way some bends go. Check the direction before approving.
- bend_radius_zero: The model has no bend radius, so the flat is approximate. Check it against the radius your tooling gives.
- bend_radius_too_small: The inner radius is below the published minimum for this material and thickness, so the bend may crack.
- bend_material_hard: This grade may crack when bent in a hard temper. Check the temper and the radius.
- bend_flange_too_short: A flange is shorter than the usual minimum for this thickness. Check it against your dies.
- bend_feature_too_close: A hole or cut-out lies within half a die width of a bend line and may distort.
- bend_hem: A hem in sheet thicker than standard tools close (mild steel 1.9 mm, galvanized 2.0, stainless 1.5, aluminium 1.3; copper and brass every hem). A hem is not checked against the minimum radius.
- bend_hem_no_tool: A hem on a press with no hemming tool ticked (Quoting rules → Machines, “Hemming tool”). With it ticked, bend_hem applies.
- bend_solid_corrected: The customer changed the angle, radius or direction of a bend measured on the model.
- bend_blank_not_redeveloped: A bend was stated at another angle or radius and the flat could not be developed again; the price is on the flat as modelled.
- bend_offset: Two opposite bends too close for two strokes: priced as one stroke on an offset tool. Check you have the tool.
- bend_offset_no_tool: Two opposite bends too close for two strokes, past the largest standard offset tool. Priced as two strokes: check it can be made.
- bend_bump: A long radius, formed by bumping and priced by its strokes. A radius tool or rolling may suit it better.
- bend_no_die: None of this press brake's dies is wide enough for this thickness. The price takes the usual die.
- bend_radius_off_die: This press brake's dies leave another radius than the one drawn. The flat was developed at the drawn radius: check it.
- bend_angle_too_sharp: A sharper bend than standard tooling usually makes.
- bend_collision_unchecked: A narrow channel: the flanges may hit the tool. Collisions are not simulated.
- bend_box_shape: Flanges on several sides may close on the tool. Collisions are not simulated.
- bend_past_columns: The bend is longer than the width between this press brake's columns.
- bend_lifting_aid: Heavier than two people should lift: plan a lifting aid.
- bend_blank_supplied_developed: The customer cuts the blank from their own flat, while the flat shown here was developed from the bent model with your K-factor and radius. The part may bend to another size: check the customer's flat.
- dxf_bend_lines_unread: Some bend lines could not be read or matched to a part: those bends are not in the price.
Tube laser
The tube laser does not take the part:
- not_a_tube: The part does not read as a length of tube.
- tube_cuts_unread: The cuts on this tube could not be read, so a person prices it.
- tube_section_too_large: The tube's section is larger than this machine takes.
- tube_wall_too_thick: The wall is thicker than this machine cuts in this material.
- tube_too_long: The part or its bar is longer than this machine takes.
- tube_too_heavy: The tube is heavier per metre than this machine takes.
- tube_bevel_no_head: The cut is on a slant, and this machine has no bevel head.
- tube_bevel_too_steep: The mitre is steeper than this machine's bevel head leans.
The quote has a price and waits for a technologist:
- tube_bevel_check: A cut is not square to the tube, as on a mitre. Check the machine has a bevel head.
- tube_blind_feature: A feature does not go through the wall, and a laser does not make it.
- tube_hole_small: A hole is small for the wall. Check it can be cut.
- tube_hole_large: The hole is over half the tube's diameter. Check it can be cut.
- tube_feature_in_radius: A cut reaches the section's corner radius. Check it can be cut there.
- tube_section_not_stocked: This section is not on the material's list of stocked sections. Check you can get it.
- tube_web_too_thin: Material between two cuts, or a cut and an end, is narrow for the wall. It may burn away or buckle.
- tube_short_part: The part is under 10 mm long. Check it can be cut.
- tube_open_section_check: An open section (angle, channel, tee, beam or zed), and this machine's largest open section is not stated. Check that the chucks hold it.
- tube_or_bent_sheet: This can be a rolled section or a bent sheet, and nobody said which. Choose the process.
Tube bender
The quote has no price:
- tube_bend_not_supported: A tube bender here bends round tube only, so a person prices this section.
- tube_bend_over_capacity: The tube is too large, or its wall too thick, for this bender in this material.
- tube_clr_too_large: The bend radius is larger than this bender takes.
- tube_too_long_to_bend: The tube is longer than this bender takes.
- tube_cuts_need_laser: This tube has cuts a saw cannot make, and there is no tube laser to make them.
The quote has a price and waits for a technologist:
- tube_clr_tight: The bend radius is under 2 x the diameter, which usually needs extra tooling. Check you can bend it.
- tube_straight_short: The straight between two bends is short for the dies. Check it can be clamped.
- tube_clamp_too_short: The straight at an end is short for the clamp. Check it can be held, or add length to cut off.
- tube_feature_in_bend: A cut lies close to a bend and may distort. Check it, or cut it after bending.
- tube_feature_in_clamp: A cut lies where the clamp grips the tube. Check it, or cut it after bending.
- tube_stacks_exceeded: The part needs more bend radii than the bender's head holds at once.
- tube_die_missing: The machine's die list has no set for this diameter and radius, so a new set is charged.
- tube_mandrel_missing: The machine's list does not hold the mandrel a bend needs, so a new one is charged.
- tube_wiper_missing: The machine's list has no wiper for a bend that needs one, so a new one is charged.
- tube_bend_off_chart: The mandrel chart has no answer for this wall at this radius, so a person decides the tooling.
- tube_thinning_high: The outside of a bend thins more than the limit set in the review rules.
- tube_bend_difficult: The bend is hard to hold: a thin wall on a tight radius. Check the mandrel and the setting.
A hollow part whose line could not be read holds the quote on a machining figure, and has no price where neither a mill nor a lathe takes it (tube_bend_not_analytic).
Limits
- Collisions are not simulated. A narrow channel or flanges on several sides hold the quote (bend_collision_unchecked, bend_box_shape) and do not refuse it.
- A bent rectangular tube is priced where its centre line was read and the park has a tube bender: as a length bought cut to size plus the bends, with no mandrel, and always held (tube_rect_bend_check). With no line read, a person prices it (tube_bend_not_supported). The quote screen shows its bends.
- Open sections read: angle, channel (lipped included), tee, I or H beam, and zed. A beam's or a tee's end is one cut through every wall: each flange from outside and the web from one side. A section with two webs is not read as a section.
- “Flat pattern” and “Folded” switch between the two forms of a bent sheet part. A flat file opens flat, a bent solid opens folded; its flat pattern is the one the price was made on, at the stated angles and radii. A tube has labels on the model and no such pair.
- A die's radius or a later “K-factor” does not develop a stored flat again. Where the radii differ, the quote waits (bend_radius_off_die).
- Tube bending is priced as rotary draw bending of round tube. Roll and freeform bending are not priced.
- A tube inside an assembly is priced part by part. Where the park can make that part in more than one way, the customer chooses its technology in the widget (422 process_required until every such part has one), and a technologist on the quote screen with the part selected.